Precision Linear Stages
512 &
522 | 535-2 | 551
| 552 | 570
| 582
back to 400 series
512 / 522
512
with stepper motor and limit switches
|
Micro Positioning Systems 500 Series |
Resolution |
The winning combination of precision-ground tables, crossed rollers,
fine-pitch screw and DC motor-controlled drive produces a perfect resolution of 0.1µm
over the long range of 25 mm/1 inch. Accuracy 0.1µm/0.000004 in. |
Some Great Features |
- Direct Compact Drive
- Fine Pitch 0.5 mm Screw
- Two Way Slip Clutch
- X, XY and XYZ Mountable
- Resolution 0.1 µm
|
|
High
Resolution Motorized Tables
|
512 |
522 |
Table Size
Height
Travel Range
|
60 X 100 mm
26 mm
25mm/1 in. |
120 X 120 mm
30 mm
25 mm/1 in. |
Guiding Method
Drive Screw Pitch
Standard Gear Ratio
|
Crossed Rollers
0.5 mm
76:1 - 10,683:1 |
Crossed Rollers
0.5 mm
76:1 - 10,683:1 |
|
512 & 522 | 535-2 | 551 | 552 |
570 | 582 | Top of Page
535-2 X-Y Microscope Stage |
535-2
539-2M
XY open frame T stage
200mm travel, 300mm X 365mm motorized |
The 535-2 motorized two axis
microscope stage is the ideal solution for automating demanding microscope operations.
Precision lead screws, quality cross roller bearings, and 13mm dia. DC gearmotor make this
the stage of choice where ultimate precision is required. Optional linear encoder scales
are offered to give 1 µm positional accuracy.
FEATURES:
- Platen size 150mm square
- Extremely low profile, 30mm height
- Clear 50mm aperture through full range of XY motion
- 0.1 µm resolution (with shaft encoders)
- 1µm resolution accuracy (with Linear encoders)
- Range of gearheads, speeds, and resolutions
- Platen drilled and tapped to suit
- Compatible with CTC-DC Motor Controller
- Analog joystick control
- Matching motorized Z-Axis
- Other travel dimensions and configurations available
- Vacuum compatible
|
512 & 522 | 535-2 | 551 | 552 |
570 | 582 | Top of Page
551 Tilting Goniometer Stage |
60mm x 60mm,
40º Travel |
The tilting stage uses a dove tail slide systems,
which is driven by a precision gear. Tilting angle is ±20º of arc from the 0º point;
plus or minus 30º.
The center of the arc of rotation is 37 mm above the center of the top surface. Two tip
tilt stages may be stacked directly to give motion rotating around a common fixed point.
Can be motorized. |
Specifications: |
SIZE
TRAVEL
STRAIGHTNESS, INCREMENTAL
GUIDING METHOD
RESOLUTION (*motorized)
REPEATABILITY (*motorized)
LOAD CAPACITY
WEIGHT |
60mm x 60mm
±20 degrees
10µm
Dove Tail
5 arc min (*30 arc sec.)
5 arc min (*30 arc sec.)
20 lbs.
2 lbs. |
|
512 & 522 | 535-2 | 551 | 552 |
570 | 582 | Top of Page
60mm x 120mm,
60º Travel |
552
Tilting Goniometer Stage |
Specifications |
SIZE
TRAVEL
GUIDING METHOD
RESOLUTION (*motorized)
REPEATABILITY (*motorized)
LOAD CAPACITY
WEIGHT |
60mm x 120mm
±30 degree
Dove Tail
5 arc min (*30 arc sec.)
5 arc min (*30 arc sec.)
30 lbs.
4 lbs. |
|
512 & 522 | 535-2 | 551 | 552 |
570 | 582 | Top of Page
570 Precision Worm Gear Tables
Rotating Stages |
|
Features
- High Precision 360º Rotation with Dual Bearings
- 570-60, 60mm Dia. Table, Large 30 mm Center Hole
- 570-100, 100mm Dia. Table. High Stability, low profile construction
|
570
|
Technical Data Table Diameter
Height
Center Hole
Scale Readings
Runout*
Wobble*
* Relative to theoretical
rotation axis |
570-60 55 mm
30 mm
30mm
1° increments
±1µm
±1 arc. sec.
* Motorized |
570-100 92 mm
30 mm
30 mm
1° increments
±1µm
±1 arc. sec.
* Motorized |
|
Technical Data Table Diameter
Height
Center Hole
Scale Readings
Repeatability*
Load Lb.(max)
Weight Lb. |
570-200 200 mm
76 mm
50 mm
1º
down to ± 1 arc sec.
350
18 |
* fuction of speed |
|
- Two precision ball bearings are supporting the
structure seated on precision machine and ground mounting surfaces, preloaded to eliminate
wobble and runout regardless of mounting position.
- The drive spindle has a leveraged hinge mount to be
easily disengaged from the worm gear to rotate the table top freely to any degree.
- The DC Motor drives and gearheads can be selected
and sized to meet the speed and resolution requirements as the project demands.
|
Rotating
Stages can be combined with other positioners, like multi-axis linear stages.
Multi-axis controllers would allow multiple movements set by the same instrument.
512 &
522 | 535-2 | 551
| 552 | 570
| 582 | Top of
Page
512 & 522 | 535-2 | 551 | 552 |
570 | 582 |
Mailing Address: PO Box 1317,
Lake Forest, CA. 92609
Shipping Receiving Address: 22061 Newbridge Dr.
Lake Forest, CA. 92630
Toll Free: (800) 991-1420
Tel. (949) 770-9911 ~ Fax (949) 770-2492
e-mail: sales@useurotek.com
|